Stainless steel pipe connection is diverse, the common types of pipe fittings are compression, compression type, live connection, propulsion, push thread type, socket welding, live-connected flange connection, welding and welding and traditional connection of the derived series connection method. These connection methods, according to their different principles, its scope of application is also different, but most of them are easy to install, solid and reliable. Connect the use of the seal ring or gasket material, most of the use of the national standard requirements of silicone rubber, NBR and EPDM, and so on, exempt users from worries.
Card Press Connection Step
1, broken pipe: According to the required length of the pipe cut, broken pipe, not too much force, to prevent the Tube lost round.
2, remove the Burr: After the pipe cut off, should be burr removed clean, lest cut seal ring.
3, marking: In order to make the pipe fully inserted into the pipe socket, you must at the end of the tube to insert the length of the marking line.
4, assembly: the sealing ring should be correctly installed in the U-shaped groove of the pipe, insert the pipe into the pipe socket, waiting for the crimping.
5, Crimping: When pressed, the tube protruding part is placed in the mold groove, the jaw and the pipe axis remain perpendicular.
6, check: After the completion of the press, the use of special gauges to check the size of the crimping.